Swiss solar tiles for new and historic buildings – in photos

Share

Freesuns solar tiles on a residential building Image: Freesuns

From the pv magazine global site

Swiss start-up Freesuns has developed solar tiles for building-integrated PV it claims can be used on historic as well as new buildings.

Freesuns chief executive John Morello said the tiles can be sized to completely replace conventional roof tiles in fiber-reinforced concrete, with three models able to potentially cover 100% of a roof surface, including on complex roof layouts.

Every tile hosts an electrical safety circuit to help prevent fire-risk, the company said, adding the product is manufactured with double tempered glass.

Three styles

Solaris’ standard tile is a 525mm by 460mm tile which reportedly delivers 154 W per square meter. It costs $299 excluding VAT. Morello told pv magazine, “This value is just an indicative value as the price can change depending on the complexity of the project.” The tile – glossy black with silver lines – is said to be ideal for new-build or renovated structures as it offers a modern architecture style.

Freesuns tiles are manufactured with double tempered glass. Image: Freesuns

The standard tile has been deployed on a 2,200 square-foot residential roof in Colombier, Switzerland, amounting to 28 kW of solar generation capacity and added 32 kW on a 2,600 square-foot residential roof in the municipality of Pully.

The premium model is a 420mm by 400mm product with a slightly lower output of 136 W per square meter. The model is recommended for modern architecture and for the replacement of cement tile roofs.

The (more expensive) matte gray product has no visible lines and could be used to replace slate-style roofs on historic buildings, according to its developer.

Solar tiles installed on the roof of the Grand Chalet.Image: Freesuns

The tiles were installed on a small house located in the 18th century Grand Chalet of Rossinière, one of the oldest chalets in Switzerland.

“For such an important heritage property it was critical to preserve the historical context in the appearance of the roof so it remained sympathetic to the site,” Freesuns said. “It was also a challenge to convince the local authorities charged with protecting the heritage of the Grand Chalet to allow solar on the roof of this building.”

The roof of the small house of the historical building now hosts 8 kW of PV capacity across its 600 square-foot roof. The matte tile is also being used on a 168 kW project under development on a 12,900 square-foot roofspace at another historic building in Switzerland.

Freesuns said the tiles come with a warranty which guarantees they will maintain 90% of power output after 10 years and more than 80% after 20 years.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

Share

Related content

Elsewhere on pv magazine...

4 comments

  1. “Every tile hosts an electrical safety circuit to help prevent fire-risk, the company said, adding the product is manufactured with double tempered glass.”

    So, this company claims a “safety circuit” on “every tile”, something that should meet the NEC 2020 RSD requirement on roof top solar PV. I have not come across that claim from the TESLA solar PV roof tile. I still have to wonder, a fire during the day requires the fireman to cut or chop through the roof to vent and maybe insert a water fan to knock down an attic fire. Without a “circuit per tile” how does one meet the RSD requirements? With a “circuit per tile” how does one “troubleshoot” bad tiles on the roof of which may have several hundred? Solar PV has typically been relatively simple, cells into panels, panels into strings, strings in parallel to create power arrays. Individual tiles into (groups), “snapped” together into strings then brought into some combiner box somewhere to complete the array block that would go to a house inverter or ESS system.

  2. Installing 100% active tiles is a lot of PV production for the size of the buildings. These buildings will clearly be feeding back 50% or more of their production into the grid. That’s a good thing!

Leave a Reply to gene rubin Cancel reply

Please be mindful of our community standards.

Your email address will not be published. Required fields are marked *

By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.

Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.

You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.

Further information on data privacy can be found in our Data Protection Policy.

Welcome to pv magazine USA. This site uses cookies. Read our policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close