Scientists from the University of Rochester have fabricated a solar thermoelectric generator (STEG) that is reportedly 15 times more efficient than current state-of-the-art devices.
A thermoelectric generator (TEG) can convert heat into electricity through the “Seebeck effect,” which occurs when a temperature difference between two different semiconductors produces a voltage difference between two substances. The devices are commonly used for industrial applications to convert excess heat into electricity. However, their high costs and limited performance have thus far limited their adoption on a broader scale.
“Right now, most solar thermoelectric generators convert less than 1% of sunlight into electricity, compared to roughly 20% for residential solar panel systems,” the researchers said, adding that for their commercial scale up lightweight selective solar absorbers (SSAs) and heat dissipators for the STEG hot and cold sides, respectively, are needed.
The novelty of their approach consisted of concentrating on the hot and the cold sides of the device rather than working on the semiconductor materials, as in previous research.
They designed the device with an internally developed special black metal technology that turns shiny metals pitch black. It uses femtosecond laser pulses to transform tungsten to selectively absorb light at the solar wavelengths with reduced heat dissipation at other wavelengths. It is reportedly able to increase thermal electrical generation by 130% compared to untreated tungsten
“We covered the black metal with a piece of plastic to make a mini greenhouse, just like on a farm,” said the research’s lead authour, Chunlei Guo. “You can minimize the convection and conduction to trap more heat, increasing the temperature on the hot side.”
As for the cold side, the scientists also used femtosecond laser pulses on aluminum to create a heat sink with tiny structures that improved the heat dissipation through both radiation and convection.
“When applying both the hot- and cold-side thermal management, with the minimized hot-side radiative and convective heat losses and the enhanced cold side radiative and convective cooling capacity, more solar energy is conducted through and utilized by the STEG,” they stressed. “This results in a greater temperature across the STEG and hence an output power increase of over 15 times while maintaining device compactness with only a 25% increase in weight.”
The system was introduced in the study “15-Fold increase in solar thermoelectric generator performance through femtosecond-laser spectral engineering and thermal management,” published in Light: Science and Applications.
“STEGs could find potential applications in powering avionic devices, wireless sensor networks, wearable electronics, and medical sensors,” the academics concluded.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.