Researchers at Oxford PV, an Oxford University spin-off working in the field of perovskites have been working on an efficiency solution that they said can help scale-up solar more rapidly.
The group is using perovskites to squeeze more power out of a solar cell, pushing past the 26% efficiency barrier presently achieved by silicon-only cells, and working to press against the “Shockley-Queisser” limit observed in photovoltaic materials.
Perovskites fulfill all the optoelectronic requirements for a PV cell, and can be manufactured using existing processes. Perovskites can be layered onto a conventional cell in tandem with silicon. These features, said the developers, make perovskites ideal plug-and-play materials to integrate with silicon technology.
Metal halide perovskites have been targeted by the research community for their properties, and have been under research and development for over a decade.
Perovskites are, in many ways, a foil to silicon, said the researchers. While silicon is a weakly absorbing material that requires hundreds of micrometers of thickness to fully absorb sunlight due to its indirect bandgap, perovskites are strongly absorbing, direct bandgap semiconductors. As such, they need less than a micrometer of material thickness.
Oxford PV
Silicon requires energy-intensive fabrication processes to create high-purity single crystals necessary for low-defect densities, where perovskites are inherently defect tolerant and can be processed at low-temperatures into polycrystalline cells.
While the two materials behave quite differently, the end result is two high-quality materials that can deliver power conversion efficiencies around 26% using low-cost fabrication routes.
The increase in efficiency created by perovskite-tandem cells can help offset some of the carbon emissions needed to produce high-purity silicon used for conventional solar PV cells, said Oxford PV.
Combining the perovskites in tandem with silicon rather than rebuilding a process for pure-perovskite or other material combination cell bypasses industry disruptions, allowing for a faster and less costly scale-up of manufacturing improved technologies. Furthermore, existing supply chains already contain the physical elements that comprise perovskite materials, paving a clear path to scale-up the technology rapidly.
Higher-efficiency cells do exist, like the III-V multi-junction devices built by Spectrolab and Azur Space. However, these are typically used in outer space, where cost is less critical than minimizing wafer area. These cells can operate at 40% efficiencies, but are expensive, and currently cannot compete with the conventional silicon market in a way that tandem cells could.
Oxford PV has been researching tandem cells for seven years, and the group said it is now close to starting mass commercial production in a factory in Brandenburg, Germany. The International Technology Roadmap for Photovoltaics forecasts the entry of tandem cells into the market after 2023.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.