Perovskite/silicon tandem solar cells approaching 30% efficiency in lab

Scientists at the Helmholtz Zentrum Berlin have taken back the world efficiency record for a perovskite/silicon tandem solar cell, achieving 29.15% with a device measuring 1cm². The record has been confirmed by Fraunhofer ISE, and according to HZB, this means that the 30% efficiency mark is within reach.

January 31, 2020 Mark Hutchins

Scientists at Helmholtz Zentrum Berlin set a new record for perovskite/silicon tandem cell efficiency.

Image: Eike Köhnen/HZB

from pv magazine global

Scientists at the Helmholtz Zentrum Berlin (HZB) has produced a perovskite/silicon tandem cell measured at 29.15% efficiency, a new world record for the technology.

HZB previously held the efficiency record for PS/Si tandem cell efficiency at 25.5%, before UK/Germany based startup Oxford PV pushed further, producing a 28% efficient cell in late 2018. HZB’s new record has been officially certified by Germany’s Fraunhofer ISE, and the group says it will now be targeting the 30% mark for this technology.

Optimizing the layers

Key to the group’s achievement were improvements in several of the cell layers. “We developed a special electrode contact layer for this cell in collaboration with the group of Prof. Vytautas Getautis (Kaunas University of Technology), and also improved intermediate layers,” explained Eike Köhnen and Amran Al-Ashouri, doctoral students at HZB.

The two went on to explain that the record breaking cell featured an improved perovskite composition which increased stability and improved the balance of currents delivered by the two cells, as well as an optimized silicon oxide top-layer on the bottom Si cell, which improved optical coupling between the two.

Diagram showing the structure of the record breaking cell, with intermediate layers in between the active perovskite and silicon. *Image: Eike Köhnen/HZB*

While the cell measures just 1cm² and was produced using laboratory techniques, the group points out the processes used to produce the cell are “suitable,, in principle for large surface areas.” They state that initial tests have shown promising results for vacuum deposition processes to scale-up production of these cells.

Pushing for 30%

The next target for the HZB group is to push this efficiency beyond 30% and closer to the technology’s practical limit of around 35%. According to group leader Steve Albrecht, discussions on the best route to achieving this are already underway.

Albrecht’s group at HZB also holds the efficiency record for a perovskite/CIGS tandem cell at 23.26%, and has licensed the technology used in this cell to an unnamed Japanese manufacturer for commercial development.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.