Renewable America designed the project to disturb the land little as possible, installing fixed-tilt tracker array that required no grading.
Also on the rise: EcoFlow unveils air-to-water heat pump, PV-powered water heater.
pv magazine USA spotlights news stories of the past week including market trends, project updates, policy changes and more.
The International Energy Agency (IEA) Photovoltaic Power Systems Programme (PVPS) has published a wide-reaching snapshot of the global PV market, covering installations, manufacturing, policy trends, and grid integration.
Research indicates that most neighbors of solar power facilities maintain positive attitudes toward these plants until they exceed 100 MW in capacity or approximately 400 acres.
Sicona has confirmed it will develop its first commercial manufacturing facility in the United States as part of its ambition to become the biggest producer of silicon-carbon battery materials in the world.
The U.S. based developer of steel PV module frames said its products are an alternative to conventional aluminum frames. They passed several third party tests as the company readies production and evaluations by module manufacturers.
Also on the rise: Turkish solar module manufacturer begins production in Texas. Construction starts at solar microgrid in Northern California Tribal community. And more.
The renewable energy conference, RE+ 2024, taking place in September in Anaheim, California, will showcase German clean energy companies in the Spotlight Country Pavilion.
Elin has an agreement with key U.S. distributors and will begin with 1 GW annual production, intending to increase to 2 GW within 18 months, the company reports.
The utility-scale solar mounting solution’s low carbon option places an emphasis on reducing carbon-intensive materials and improving logistics.
Maxeon has filed two different lawsuits in the United States against Hanwha Qcells and REC over claims that the two manufacturers used an unspecified tunnel oxide passivated contact (TOPCon) solar cell technology.
The new X1 can operate inside or out, from -4 F to 131 F, delivering what Anker says is 100% power output without derating. It also has a NEM 3.0 mode, which enables battery storage and grid sell-back in states under NEM 3.0 jurisdiction.
The new heat pumps use R-454B as a refrigerant and are specifically designed to be matched with Johnson Controls’ residential gas furnaces. Their size ranges from 1.5 tons to 5 tons and their coefficient of performance (COP) spans between 3.24 and 3.40, according to the manufacturer.
Preliminary reports from the Coalition for Green Capital say investment in clean energy projects and technologies increased 52% over 2022.
Also on the rise: Allow solar developers to choose “connect and manage,” says DOE roadmap. Massachusetts city that mandates solar on new buildings celebrates latest success. And more.
To speed interconnection of utility-scale renewables and storage projects, a U.S. Department of Energy roadmap sets forth 35 solutions and proposes actions to implement the solutions. The roadmap was developed through a DOE stakeholder process known as i2X.
Trends spotted in the NC Clean Energy Technology Center report include legislation to enable community solar, net metering reform considered by new states and states clarifying time of use rates for net metering customers.
A U.S.-based team developed a vapor deposition technique to fabricate outperforming all-inorganic perovskite thin films in under 5 minutes in a continuous process. The adoption of the proposed approach may also result in higher perovskite solar cell power conversion efficiencies.
Dismissed by many in the solar industry as an overly complex, outdated technology, concentrated solar power (CSP) is set for a comeback thanks to a scaled-down, modular approach.
Welcome to pv magazine USA. This site uses cookies. Read our policy.
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.